jandris logo

A division of A. Jandris & Sons, Inc.

199 East Broadyway (Rt. 2A), Gardner 978-669-0088
Hours: M-F 7am-4:30pm and Sat 8am-1pm

Follow Us On

gator dust

Alliance Gator Dust Bond

Gator Dust Bond is a unique mixture of polymer binders and calibrated stone available in Sahara Beige, Stone Grey. Once Gator Dust Bond sets, it becomes very firm and locks between the wet cast or natural stone joints while still retaining flexibility and providing a long lasting, durable jointing material. Gator Dust Bond is recommended for a variety of uses including pool decks, patios, footpaths, and any other pedestrian applications.

Interested in this product? Please reach out to us to learn about availability and delivery options if needed.

FEATURES

  • XTRA Bonding
  • XTRA Strength
  • XTRA Durability
  • Product works at above 59°F (15°C)
  • Gator Dust is ideal for joints that are a minimum of 1/2˝ (1.25 cm) to a maximum of 6˝ (15 cm) wide
  • For pedestrian use only
  • Ideal with the application of Gator Base Panel foundation
  • Compatible with all types of wet cast and natural stones
  • Waterproof bag: Intact pallets or bag can be laid flat and stored outdoors. (Lay bag flat on its back, so front of the bag is facing you.)
  • Fast Setting: Rain safe after 24 hours without rain

IDEAL FOR

  • Patios
  • Walkways
  • Pool decks

PACKAGING

PRODUCTS RETAIL SIZE UNITS PER PALLET
Gator Dust Bond – Sahara Beige 22.7 kg (50 lb) 56
Gator Dust Bond – Stone Grey 22.7 kg (50 lb) 56
  • Plastic bags
  • Intact pallets can be stored outside
  • Waterproof bags: Lay bag flat on its back, so front of the bag is facing you.

GATOR DUST INSTALLATION FOR WETCAST & NATURAL STONES

PREPARATION INFORMATION (IMPORTANT NOTES)

  1. Always refer to the latest Gator Dust Technical Data Sheet (TDS) at alliancegator.com before installing Gator Dust.
  2. Gator Dust must be installed above 59°F (15°C).
  3. Gator Dust can only be installed if rain is not forecasted in the next 24 hours.
  4. Wet cast & natural stones sides and top surfaces must be completely dry. Do not apply if the wet cast or natural stones surfaces are damp or wet. The damp or wet surfaces will cause Gator Dust to prematurely activate and will lead to the polymers sticking on the wet cast or natural stones surfaces.
  5. Do not apply if the wet cast or natural stones joints are damp or wet. This will prevent the Gator Dust from properly sliding into the joints and obtaining very densely packed joints, which is critical to the products performance.
  6. Minimize or avoid walking on the wet cast or natural stones for 24 hours after the installation of Gator Dust.
  7. If Gator Dust is left lying on the wet cast or natural stones surfaces for a long duration, moisture can form and will activate the Gator Dust on the wet cast or natural stones surfaces, staining may occur.
  8. Do not use Gator Dust when wet cast or natural stones are installed over a concrete base. Gator Dust is designed to function on a traditional base system. A concrete base inhibits drainage; thus, the trapped water will negatively impact the product’s performance.