UMACO Products

Concrete Patching & Repair Products, Masonry Waterproofing Products, Acrylic Admixtures & Bonding Agents, Flooring Underlayments & Resurfacers, Decorative Masonry & Concrete Coatings, Traditional & Synthetic Stucco Systems

U-Seal - A brushable, cement based, waterproof coating which protects and decorates concrete and masonry surfaces, above or below grade. Available in white or gray.
Specifications

U-Trowel - A cement based waterproof stucco applied by trowel over properly prepared masonry and concrete surfaces. One coat provides a high density finish in a wide variety of textures. Available in white or gray. Other colors are available when mixed with Add Mix-35 Colors.

U-Trowel Basecoat - A blend of cement, aggregates and alkaline resistant fibers applied by trowel over a variety of surfaces (including galvanized wire lath) as a basecoat for U-Trowel.

Styrocoat - A cement-based, polymer-modified basecoat for synthetic stucco finishes. Applied by trowel, Styrocoat embeds fiberglass reinforced mesh fabric over expanded polystyrene insulation board and cement board.

Finish-Coat - A 100% acrylic-based, aggregate-textured, synthetic stucco applied over properly prepared expanded polystyrene insulation board, concrete, masonry, exterior-grade plywood, plaster and stucco surfaces. Finish-Coat is ready to use and available in a variety of colors.

Acrylflex Fine - A cement based, patching, topping and underlayment material applied by trowel from 1/4" down to a feather-edge when missed with Umaco Add Mix-21.

Acrylflex Regular - A cement based, patching, topping and underlayment material applied by trowel from 1/8" up to 3/4" when mixed with add Mix-21.

Flash-Patch - A fast setting, single component, patching and leveling material applied by trowel over concrete, masonry and plywood surfaces from a feather-edge up to 1/2".

Level-Quick - An interior underlayment material used to smooth imperfections in a variety of surfaces such as pitted concrete, knot holes, cracks, nail holes and seams in wood sub floors.

Feather-Edge - A fast-setting (20 minutes, cement-based, polymer-modified compound used to smooth interior surfaces from 1/4" down to a true feather-edge prior to the installation of a variety of floor coverings such as a ceramic tile, VCT, sheet vinyl and carpeting.

Self-Leveler 4000 - A self-leveling, resurfacing compound that can be poured or pumped over a variety of uneven, properly prepared surfaces from a feather-edge up to 1" in a single pour.

U-Patch - A fast setting, cement based, non shrink material to repair all types of vertical and horizontal concrete and masonry surfaces.

VHO Patch - A polymer modified, cement based material designed to repair vertical, horizontal and overhead concrete and masonry surfaces up to two inches thick in one application.

Vinylcrete - A polymer modified, Cement based, waterproof material used to patch holes up to 1-1/2" deep, smooth uneven and pitted concrete and repoint all types of masonry.

U-Plug - A fast setting, non shrink, hydraulic cement designed to patch leaking holes and cracks, stopping running water instantly.

Tite Roc - A pourable, quick setting, expanding hydraulic cement designed for anchoring fixtures into cement and masonry.

Non Shrink Grout - An all purposed, cement based, mineral aggregate grout intended for use in general construction applications.

Road Patch - A rapid setting, high early strength, polymer modified, cement based overlayment material used for restoration of concrete substrates. Ready for rubber wheeled traffic in approximately 60 minutes.

Thinset Mortar - A bond coat designed to set all types of tile over properly prepared horizontal concrete and masonry surfaces only.

Multi-Purpose Tile Mortar - A polymer modified, bond coat designed for setting tile over a variety of properly prepared horizontal and vertical surfaces.

Glass Block Mortar - A single component, waterproof, cement based mortar designed for use when setting decorative glass block.

Manufactured Stone Mortar - A polymer modified mortar used to install a variety of manufactured stone veneers over properly prepared surfaces.

Block-Lock Adhesive - Provides a strong, durable bond when installing caps to block retaining walls, regardless of temperature. Easy to apply with a standard caulk gun. May also be used to adhere brick pavers, etc.

Surface Bonding Cement - A cement-based, fiber-reinforced, polymer-modified, waterproof coating designed to be applied by trowel over dry stacked concrete block, rigid insulation board, masonry and concrete surfaces.

Add Mix-21 - An acrylic, liquid additive for cement based mixes used to increase adhesive bond as well as tensile and flexural strength.

Add Mix-35 - An acrylic, liquid additive for cement based mixes used to increase adhesive bond as well as tensile and flexural strength.

Add Mix-35 Colors - An acrylic, Liquid additive for U-Trowel designed to provide color and increase adhesive bond as well as tensile and flexural strength.

Bond All Exterior - A brushable, water based, exterior grade bonding agent designed for use when applying cement based and gypsum mixes.

Bond All Interior - A brushable, water based, interior grade bonding agent designed for use when applying cement based and gypsum mixes.

Act Fibers - Alkaline resistant fibers which may be added to any cement based mix in order to help reinforce against plastic crack formation.

Cold Check - A chloride based admix for concrete and mortar mixes designed to accelerate the set time and help protect against freezing in cold weather conditions.

Siloxane 12 - An exterior-grade, clear, deep-penetrating, solvent-based water repellent (12% Solids) applied over untreated masonry and concrete surfaces.

Siloxane 20 - An exterior-grade, clear, deep-penetrating, solvent-based water repellent (20% Solids) applied over untreated masonry and concrete surfaces.

Transeal - An all purpose, solvent based sealer for use on masonry and concrete surfaces. Transeal protects and highlights the natural beauty of the surface being coated. Transeal is available in Clear (gloss), Matte (semi-gloss) and in the standard colors as shown below.

Transeal WB - An interior/exterior, durable, waterborne acrylic sealer applied over properly prepared masonry and concrete surfaces. Transeal WB is low odor making it an ideal sealer to use for interior applications. Transeal WB is available in Clear (gloss) and in a variety of colors.

Elastoflex - A flexible, elastomeric, waterproof coating which can bridge hairline cracks. Elastoflex is available in 10 Colors.

Concrete Cure & Seal - A water based, acrylic modified liquid designed to cure, seal, harden and dust proof concrete floors.

Concrete Cure - A cost effective, dissipating, resin emulsion, curing compound which properly cures concrete helping reduce the risk of scaling when applied after finishing.

Concrete Floor Sealer - A solvent based, acrylic sealer designed to protect and seal properly prepared concrete floors, including garage floors subject to vehicular traffic. Available in clear and in 10 colors.

Concrete Cleaner & Degreaser - An environmentally safe, cleaner and degreaser used to remove rubber tire marks, stains, oils, grease and other contaminants from concrete surfaces.

Concrete Form Release - A chemical release for concrete forms that effectively prevents bonding of concrete to steel, aluminum, plywood and composite forms. Composed of organic chemicals that react with the concrete to prevent adhesion and provide a quick and easy release.

Elastomeric Sealant Caulk - A high performance elastomeric caulk which adheres to masonry, wood, asphalt, metal and vinyl for use in a wide variety of roofing and general construction applications. May be applied to damp or oily surfaces regardless of temperature. Available in 8 colors.

Ultra-Seal - A clear brushable, rubber like sealant for use in a wide variety of general construction and roofing applications. Ultra-Seal adheres to masonry, concrete, wood, asphalt and metal surfaces. May be applied to damp or oily surfaces regardless of temperature.

Mortar Joint Repair - A siliconized, water based acrylic sealant designed to repair cracks in mortar, block or any other cementitious surface. Easy to apply with a standard caulk gun.