Get more advanced features for the money!
The new LM30 offers all the ease-of-use features of our regular Wizard models, including one-button, leveling, plumbing, and alignment, indoor/outdoor suitability, variable speed rotation plus Spot mode, and “one person” operation.
However, the LM30 gives you even more! Dual beams (level and plumb) are standard, as well as short and long chalk line “point and shoot” sweep modes, and LED mode indicator. Protected level vials prevent damage and shield vials from the sun to prevent misreads.
In addition, the LM30X model features an automatic out-of-level shut-off sensor, and is compatible with an optional remote control.
LM30 Wizards are ideal for indoor and outdoor uses, including drop-ceiling installation, finish carpentry, floor or wall tile installation, porch or deck construction, foundation layouts, and more.

__________________________SPECIFICATIONS
Laser Diode
635nm Visible Red Beam
Leveling Accuracy
1/4" at 100' (6mm at 30m)
Working Range
Up to 200' (60m) Indoor Diameter; Up to 800' (244m) Outdoor Diameter with Optional Laser Detector
Plumb Beam
Yes, 10 minute Vial Sensitivity
Level Beam
Yes, 5 minute Vial Sensitivity
Leveling Method
Manual - Two Screw
Weight
3.6lbs (1.6kg) with Batteries
Power
Four (4) "C" Cell (Alkaline Recommended) : ±60 Hours Intermittent Use
Rotation Speed
Two Speed 360¥ - 150 RPM, 600 RPM, Spot Mode
Special Features
One Button Operation, Dual 5/8"x11 Tripod Thread for Horizontal and Vertical Mount, Short and Long Sweep Modes, Protected Shade Level Vials, Built-in Trivet, Emits Eye-Safe Laser Light
Includes
Carrying Case, Batteries, and Instruction Manual
Warranty
One Year

Avaliable in three kits:

The LMH Series Automatic Self-Leveling Rotary Lasers offer fast and simple leveling power to handle your toughest indoor/outdoor jobs with less manpower.
The LMH Series levels itself via electronic sensors interfaced with motors, eliminating the need for re-leveling or rechecks. No more fussing with manual leveling screws or bubbles; just turn it on and you are ready for work! Plus, the built-in Anti-Drift System (ADS) sensor provides peace of mind when working on a busy job site; if the laser’s “height of instrument” (H.I.) is altered due to tripod movement or an accidental bump, the operator is instantly alerted.
· Single Beam Offers 600 RPM Rotation for Optimal Use with Detector or Depth Sensor
· Anti-Drift System to Signal Operator When Unit is Moved Out of Position Automatic/Manual Mode
· No Bubble Required – Wide Self-Leveling Range of ±5¼ (1¼ per Second in Horizontal)
· Low Battery Indicator So You Don’t Run Out of Power at the Wrong Time
· Heavy Duty Glass Enclosed Beacon and Durable Sealed Housing is Water and Dust-Resistant (IPX4) to Ensure Years of Dependable Operation
· Pro Grade – Motorized, Electronic Horizontal Self-Leveling
Laser Diode:
650nm— LMH and LMH-C
635nm— LMH-GR
Leveling Accuracy:
LMH-C
LMH, LMH-GR

±3/32-in at 100-ft (±3mm at 30m)
±1/16-in at 100-ft (±1.5mm at 30m)
Working Range:
LMH-C
LMH, LMH-GR

Up to 1000-ft (305m) diameter with laser detector
Up to 2000-ft (610m) diameter with laser detector
Leveling Type:
Electronic Self-Leveling ±5° (±3° LMH-C)
Warranty:
2 Years
Environment:
Built for all-weather general construction needs (IPX4). Operating Temperature 22°F to 120°F (-6°C to 49°C)
Power:
Four (4) “D” cell Alkaline batteries provides 75± hours intermittent use, or rechargeable battery pack provides 30+ hours use

Avaliable in two kits:

LMHC	Includes Laser Level, Detector and Carry Case
LMHCKP	Includes Laser Level, Carry Case, Tripod and Rod