Euclid Chemical Products

Euclid’s products include concrete and masonry admixtures, curing and sealing compounds, epoxy adhesives and coatings, dry shake floor hardeners and toppings, cementitious and epoxy grouts, joint fillers and sealants, as well as a complete line of concrete repair and restorations materials.

Enviroform - Biodegradable Form Release Agent A chemically reactive architectural concrete form release agent blended from natural "environmentally friendly" raw materials. Formulated to release hardened concrete from a wide range of forming material. Environmentally compliant for use in both indoor and outdoor applications. Contains no diesel fuel, common lubricaing oils, waxes, or kerosene. Enviroform is 100% biodegradable.
Technical Data Sheet
MSDS

Ultra - Premium Concrete Form Release Agent A clear and odorless chemically reactive architectural concrete form release agent formulated to release hardened concrete from most forming materials. Environmentally compliant for use in both indoor and outdoor applications. Contains no diesel fuel, common lubricating oils, waxes, or kerosene. V.O.C. compliant.
Technical Data Sheet
MSDS

React VOC - A chemically reactive, positive barrier form release agent especially formulated to meet the demanding requirements of architectural forming in any climatic environment. V.O.C. compliant. Technical Data Sheet
MSDS

Form Oil VOC - A low cost blend of petroleum based organic chemicals which prevent adhesion of concrete to forms. V.O.C. compliant.
Technical Data Sheet
MSDS

Aquastrip - A water based, positive barrier, form release agent formulated to meet the demanding requirements of architectural concrete forming. Complies with all local, state and federal V.O.C. and air quality control regulations.
Technical Data Sheet
MSDS

Aquafilm - Aquafilm is a ready to use water based evaporation retardant for concrete flatwork. Aquafilm reduces surface moisture evaporation in rapid-drying conditions (high temperature - low humidity - wind - direct sun). V.O.C. compliant.
Technical Data Sheet
MSDS

Cure & Seal VOC - A high solids, water clear acrylic copolymer that cures, seals, dustproofs and hardens freshly cast concrete. Contains JP-64 to assure adhesion and eliminate flaking. A high gloss film that provides maximum protection to slabs against common staining materials. Reduces slab clean-up costs up to 50%.
Technical Data Sheet
MSDS

Cure & Seal WB - A water based acrylic emulsion curing compound, sealer, dustproffer and hardener.
Technical Data Sheet
MSDS

Super Seal - A heavy duty interior and exterior curing and sealing compound for use on a wide range of concrete, and exposed aggregate surfaces. V.O.C. compliant.
Technical Data Sheet
MSDS

Intraseal - Intraseal is a penetrating water-based reactive siliconate solution specifically designed for protecting concrete floors against abrasion, dusting and spillage. Intraseal penetrates deeply creating an integral matrix that won't wear away. Intraseal imparts a low gloss, satin sheen with use without buffing. V.O.C. compliant.
Technical Data Sheet
MSDS

Con-O-Lith - A chemical hardener and dustproofer for concrete. A solution of combination fluosilicates that reacts chemically with the free lime to make a more dense and durable surface. Con-O-Lith is an excellent dustproofer for old, worn, or problem dusting floors and is V.O.C. compliant.
Technical Data Sheet
MSDS

Conhard - A water-based cure hardener and dustproofer.

Superseal WB - A heavy-duty, water-based interieor/exterior transparent sealing compound for conctere, natural stone and exposed aggregate .

Strong Bond - A ready to use, acrylic admixture and bonding agent designed to improve the adhesion and durability of concrete, masonry, stucco, terrazzo and portland cement-sand mixes to horizontal and vertical concrete and other surfaces.
Technical Data Sheet
MSDS

Weldtight - A general purpose rewettable bonding agent, when delayed timing is necessary to place new concrete, stucco, plaster or cementitious repair mortars to existing concrete and masonry surfaces. V.O.C. compliant.
Technical Data Sheet
MSDS

Conspec 100 Non-Metallic Grout - Non-Shrink, High Flow, High Strength - A high performance, non-shrink, precision grout designed for a wide range of consistencies from damp pack to high fluidity. Meets the most demanding job conditions with an extended work-time providing maximum fluidity and high strength. 100 Non-Shrink, Non-Metallic Grout is a blend of Portland Cement, specially blended aggregates and cementitious agents, and can be easily pumped.
Technical Data Sheet
MSDS

Enduro 50 Grout - Non-Shrink, Non-Metallic Specially designed for damp pack to fluid applications. It is a blend of Portland Cement and natural aggregates with cementitious expansive agents.
Technical Data Sheet
MSDS

Conspec Special Patch - Polymer-Modified Concrete Repair Mortar A polymer-modified, cementitious two-component concrete repair mortar for use in thin and thick-section concrete patching and overlays. Conspec Special Patch provides excellent freeze-thaw resistance, superior adhesion and resistance against the penetration of de-icing salts and other contaminants. Ideal for repairing interior warehouse slabs or exterior concrete pavements.
Technical Data Sheet
MSDS   (Powder Component)   (Liquid Component)

LPL Patch - High Early Strength - Extended Work Time A specially designed, single-component patching and structural repair product for any maintenance and new construction projects where prolonged working time up to 40 minutes and fast strength in two to three hours is required. LPL Patch may also be used as an underlayment or for overlay applications.
Technical Data Sheet
MSDS

Pave Patch - A specially formulated patching material for concrete pavement repairs. Pave Patch sets fast, develops high early strength and expands slightly. Usable in temperatures down to 32°F(0°C). Resistant to freeze-thaw cycles, salt and heavy traffic.
Technical Data Sheet
MSDS

Pave Patch 3000 - A specially formulated patching material for concrete pavement repairs. Pave Patch - 3000 sets fast, develops high early strength and expands slightly. Usable in temperatures down to 32°F(0°C). Resistant to freeze-thaw cycles, salt and heavy traffic.
Technical Data Sheet
MSDS

Super Faststop - A durable, resistant, hydraulic cement formulated specifically for preventing water seepage through concrete or masonry walls and floors. When subject to water pressure, Super Faststop becomes hard and more resistant. Super Faststop sets in approximately 90 seconds depending upon the temperature of the mixing water. It will not shrink or oxidize.
Super Faststop will last the life of the structure.
Technical Data Sheet
MSDS

Delay S - Chemical Horizontal Surface Retarder A spray applied organic chemical surface retarder that delays the set of concrete to create exposed aggregate surfaces. Delay S is a water soluble, easily sprayable, nonflammable liquid and is V.O.C. Compliant.
Technical Data Sheet
MSDS

Orange Peel A heavy-duty emulsified citrus concrete cleaner/degreaser/stripper. Orange Peel is a V.O.C. compliant, non-etching concrete cleaner used to prepare surfaces for Conspec penetrating sealers or general maintenance. Used directly, Orange Peel will effectively help remove common curing and sealing compounds and cutback adhesives.
Technical Data Sheet
MSDS

Conspec Weather Seal WB - Water-Base Siloxane Penetrating Sealer for Concrete and Masonry Surfaces. Conspec Weather Seal WB is a water base deep penetrating siloxane sealer designed to protect concrete and masonry surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, etc.. Conspec Weather Seal WB protects against the corrosive effects of de-icing salts (chloride screen) moisture and weathering, to prevent the spalling and deterioration of concrete structures. V.O.C. compliant.
Technical Data Sheet
MSDS

Conspec Silane 20 WB - Conspec Silane 20 WB is a water base deep penetrating sealer designed to protect concrete and masonry surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, etc.. Silane 20 WB protects against the corrosive effects of de-icing salts (chloride screen) moisture and weathering, to prevent the spalling and deterioration of concrete structures. V.O.C. compliant.
Technical Data Sheet
MSDS

Conspec Silane 40 - Conspec Silane 40 is a non-water base deep penetrating sealer designed to protect concrete and masonry surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, etc.. Conspec Silane 40 protects against the corrosive effects of de-icing salts (chloride screen) moisture and weathering, to prevent the spalling and deterioration of concrete structures. V.O.C. compliant.
Technical Data Sheet
MSDS

Conspec Silane 40 WB - Conspec Silane 40 WB is a water base deep penetrating sealer designed to protect concrete and masonry surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, etc.. Conspec Silane 40 WB protects against the corrosive effects of deicing salts (chloride screen) moisture and weathering, to prevent the spalling and deterioration of concrete structures. V.O.C. compliant.
Technical Data Sheet
MSDS

Linseed Oil Compound - A light coat applied to concrete or masonry surfaces protects against freeze-thaw cycles and deicing chemicals. V.O.C. compliant.
Technical Data Sheet
MSDS

JointFill
A Two-Component, Rapid Curing Polyurea Joint Filler A 100% solids, two-component, self-leveling aromatic polyurea joint filler having good flexibility, and elongation allowing 10-15% joint width movement. JointFill can be installed in temperatures as low as 15°F (11°C). JointFill is a moderately hard joint filler having a Shore A hardness of 75-80 and can be used in place of semi-ridged epoxy fillers.
Technical Data Sheet
MSDS   Part A*   Part B*

CM 2000
A Two-Component, Ultra Low Viscosity, Rapid Curing Polyurea Concrete Repair Material An ultra low viscosity, two-component, rapid cure, and chemical resistant material for the repair of hairline cracks or, deteriorated and spalled concrete. CM 2000 can be installed in temperatures as low as -40°F (-40°C)
Technical Data Sheet
MSDS   Part A*   Part B*